Copy paste dari :

http://www.mikrotik.com/documentation/manual_2.7/System/SSH.html

Hanya tuk pajangan aja. *mode ngga kreatip on*

SSH Server

Submenu level : /ip service

Description

SSH Server is already up and running after Mikro Tik router installation. The default port of the service is 22. You can set a different port number.

Property Description

name (name) – service name
port (1…65535) – port the service listens on
address (IP address/mask; default: 0.0.0.0/0) – IP address from which the service is accessible

Example

[admin@MikroTik] ip service>set ssh port=51
[admin@MikroTik] ip service> print
Flags: X - disabled, I - invalid
  #   NAME                                                            PORT  ADDRESS
  0   telnet                                                          23    0.0.0.0/0
  1   ftp                                                             21    0.0.0.0/0
  2   www                                                             80    0.0.0.0/0
  3   ssh                                                             51    0.0.0.0/0
[admin@MikroTik] ip service>

SSH Client

Command name:/system ssh

Example

[admin@MikroTik] /system ssh 10.0.0.211 user=admin port=22
admin@10.0.0.211's password:


  MMM      MMM       KKK                          TTTTTTTTTTT      KKK
  MMMM    MMMM       KKK                          TTTTTTTTTTT      KKK
  MMM MMMM MMM  III  KKK  KKK  RRRRRR     OOOOOO      TTT     III  KKK  KKK
  MMM  MM  MMM  III  KKKKK     RRR  RRR  OOO  OOO     TTT     III  KKKKK
  MMM      MMM  III  KKK KKK   RRRRRR    OOO  OOO     TTT     III  KKK KKK
  MMM      MMM  III  KKK  KKK  RRR  RRR   OOOOOO      TTT     III  KKK  KKK

  MikroTik RouterOS v2.7 (c) 1999-2002       http://www.mikrotik.com/


Terminal vt100 detected, using single line input mode
[admin@10.0.0.211] >